IN THE BEST
One Design Covers Since 1972!
a club webite? Become and affiliate of The Sailors' Tailor and make some
extra money. Here's how.
Value Added For You!
In 1999 we switched to highly environmentally
resistant PTFE Teflon
thread for longer seam life.
Covers in 1
deck cover to use for both trailing and mooring. Lies flat
over the deck for trailing and can be drawn up for the water run-off
while mooring. Has 5/16' elastic shock cord in the hem to hold 6'
under the rubrail, tie-down points, heavy duty nylon zipper, mast
collar with drawcord closure, and flaps that snap around stays.
Reinforcements are at back corners, fairlead areas, cleat areas,
splashrails. Does not fit over boom when boom is in crutch
with mast up. Store boom in cockpit. To use cover over mast for
trailing (photo #2) requires that the mast be no higher than 10"
above the deck where the mast steps and no higher than 3" above
deck over-boom cover with heavy duty nylon zipper running
from mast to sidestay and flap that snaps over zipper to protect
zipper from damaging UV. Mast collar with drawcord closure.
Flaps that snap around stays to protect chainplates from water
seepage and shade deck from UV discoloring in the stay area.
Covers for most classes fit with 5/16' elastic shock cord
in the hem and tiedown points. Other class covers, such as
Thistles and Highlanders, attach with snaps. We supply you
with both the cover snaps and hull snaps. Large screen at
aft end for the ventilation and vent over front deck at dark
covers and those fabrics that have less breathability. Reinforcements
at gooseneck just behind mast collar, at end of boom, over
spinnaker cleats and pulleys, over all standard-class protruding
cleats and eyes, and back corners of boat. Exceptionally good
UV protection for sails left flaked over boom during mooring.
in both Mooring and T-M versions. Full deck cover with all
the detailing of the Mooring and T-M styles above PLUS has
skirt to protect sides, transom, and bow from fading or chalking
in sunlight. Skirt has flaps that snap around sidestays and
velcro closure at bow.
tent covers cockpit and fits over the boom from mast to tramsom.
Snaps together down front of the mast. Reinforced over gooseneck
just behind mast collar and over outhaul at end of boom. Either
hook hardware is provided for attaching to boat.
deck cover lies flat over deck. No mast or stay holes. Elastic
shock cord in hem to hold cover against side of boat 6"
under the rubrail. Reinforcements over splashrail, at back
corner, over cleats and eyes.
Cover (MTM Cover)
of our Mooring and Trailing-Mooring Cover. For mast up, this
full deck cover fits over slanted boom sloping from the gooseneck
at the mast down to a cushion resting on the back deck. For
trailing or storage, slanted mast supports cover and gives
it same pitch to shed rain water. Has heavy duty nylon zipper
running from mast to sidestay and flap that snaps over zipper
from damaging UV. Mast collar with drawcord closure. Flaps
that snap around stays to protect chainplates from water seepage
and shade deck from UV discoloring in the stay area. Fits
with 5/16" elastic shock cord in hem and tie-down points.
Reinforcements at gooseneck just behind mast collar, at end
of boom, over spinnaker cleats and eyes, and back corners
napbac canvas protects bottom and sides from dirt and flying
stones while trailing. Soft flannel-like interior of fabric
polishes your racing surface keeping it slick. Has 5/16"
elastic shock cord in the hem to hold cover onto deck and
has webbing loops to tie drawcord across boat. Designed with
Here For Your "FREE"
mail me your FREE
fabric samples and cover information packet. I would like to
see first hand the color and finish, so I can fully appreciate
the thickness and quality of your fabrics.
|| How to Choose the Right One-Design Cover.
||Poly Army Duck and Acrylic